Autos in Aircube system

[Driver77]

Harvested the big TP today. Found some PM on lowers of the RSB...treated it with peroxide and bio fungicide. The TP went right around 60days....the 2 RSB's are going to be harvested next week probably....if I can keep the PM in check.
Last 3 pics are the TP I harvested today.

 

[Neofirebird]

@Driver77 I'm a fellow jacks user could you enlighten me on how you ramp up? Thanks
I use it at 3.79-2.52-.99 ratio. In seedling stage 770ppm(700 scale)...slowly ramp up to the 1500's and it stays there till harvest.

 

[Driver77]

This time around I'm going to try not ramping. I have new seedlings in and still have a plant finishing.....also I now feed my soil grows from the same rez so it needs to stay in the 1500's. But when I did I just started mixing stronger as I added to rez....so up to 900 or so and then 1100 a few days later and so on.
So far the seedlings are doing fine...

 

[Driver77]

I had to cull the green RSB because of PM....the other RSB yielded 12oz's dried after a bud wash. The TP yielded 3 oz and the remaining is probably going to only be around 4oz ...so only a little over a lb from that grow.
New seedlings are Sweetseeds Jealousy z XL auto's and are around a week above ground.

 

[Neofirebird]

This time around I'm going to try not ramping. I have new seedlings in and still have a plant finishing.....also I now feed my soil grows from the same rez so it needs to stay in the 1500's. But when I did I just started mixing stronger as I added to rez....so up to 900 or so and then 1100 a few days later and so on.
So far the seedlings are doing fine...

Mixing stronger than the 3.79:2.52:.99 ? Can you help me understand?

 

[Neofirebird]

To give you some more information I'm running the "old" feed rate of 3.6:2.4:1.1 in coco with vermiculite using fabric pots in autopots. I supplement with silica, dynomycos mixed in the media, hydroguard, orca, Mr Fulvic acid and drip clean I run the same the whole run. He's a recent example of my work with a Mephisto Genetics Toofless Alien.

 

[Driver77]

Mixing stronger than the 3.79:2.52:.99 ? Can you help me understand?

So the 3.79 2.52 .99 are for a gallon of water....to mix weaker I just use more than a gallon of water....stronger I mix it with less.
So if I wanted stronger I might mix 37.9g 25.2g and 9.9g with 9 gallon of water.

 

[Driver77]

I get a roughly 1500ppm(700 scale) if I mix it as directed with ro water starting at 0.
I did run it at first with ro that was 100ppm so it upped it to 1600's
Hope that made sense

 

[Driver77]

To give you some more information I'm running the "old" feed rate of 3.6:2.4:1.1 in coco with vermiculite using fabric pots in autopots. I supplement with silica, dynomycos mixed in the media, hydroguard, orca, Mr Fulvic acid and drip clean I run the same the whole run. He's a recent example of my work with a Mephisto Genetics Toofless Alien. View attachment 1705944

You might try the new mix formula.....it's supposed to be for weed. Seems like the new one would end up with slightly less N
Also are you mixing part A with the mag first before adding part b? I didn't know there was a out of sequence mixing progression.....it's 1 and 3 together then add 2....then ph.

 

[Driver77]

New girls are in. All except bottom right which is a bag seed